Welcome to visit Ball Lan!
Current location:front page >> mechanical

Air source heat pumps don’t need to be treated in winter

2025-12-16 16:02:28 mechanical

Air source heat pumps don’t need to be treated in winter

As winter approaches, many families begin to pay attention to the use of air source heat pumps. Especially when the air source heat pump is not used for a long time in winter, how to handle it correctly becomes the focus of users. This article will give you a detailed answer to this question based on the hot topics and hot content on the Internet in the past 10 days, and provide structured data for reference.

1. Common problems when air source heat pumps are not used in winter

Air source heat pumps don’t need to be treated in winter

When an air source heat pump is not used for a long time in winter, it may face the following problems:

Question typeSpecific performance
Pipes freeze crackedIn low temperature environments, water in pipes freezes and expands, causing pipes to rupture.
Equipment rustMoist conditions may cause internal parts to rust
System cloggedPrecipitation of impurities may cause system blockage
performance degradationLong-term idleness may result in equipment performance degradation

2. The correct way to deal with the air source heat pump when it is not used in winter

In order to avoid the above problems, it is recommended to take the following measures:

Processing stepsSpecific operations
Drainage and antifreezeCompletely drain the system of water to prevent freezing
Cleaning and maintenanceClean filters and heat exchangers to keep equipment clean
Power outage protectionCut off the power supply to avoid unnecessary energy consumption
Regular inspectionCheck device status monthly
Protective cover installationInstall a protective cover for the outdoor unit to protect it from snow and freezing rain

3. Winter maintenance suggestions for air source heat pumps of different brands

Based on the hot discussions on the Internet in the past 10 days, we have compiled the winter maintenance suggestions of major brands:

brandWinter maintenance suggestionsThings to note
GreeIt is recommended to use antifreeze to keep the system runningRequires professional operation
BeautifulRecommended drainage treatment, power outage protectionPay attention to thorough drainage
HaierIt is recommended to power on and run once a monthEach run should take no less than 30 minutes
DaikinIt is recommended to use special antifreezeNeed to be proportioned

4. User FAQs

1.Does the air source heat pump not need drainage in winter?

Yes, drainage is the most effective way to prevent pipes from freezing and cracking. It is necessary to ensure that the system is completely drained of water.

2.How often does an idle heat pump need to be inspected?

It is recommended to check once a month, mainly to check whether there are any abnormalities in the equipment and whether the protective cover is intact.

3.Can antifreeze replace drain water?

Some brands allow the use of antifreeze, but you need to strictly follow the instructions. It is recommended to consult a professional.

4.What should I pay attention to when re-enabling?

Before reactivation, the system should be thoroughly inspected to ensure there are no leaks and operations should be restored gradually.

5. Professional advice

1. When the air source heat pump is not used in winter, it is best to formulate a detailed maintenance plan and strictly implement it.

2. For high-end models with higher value, it is recommended to contact professional after-sales personnel for maintenance.

3. Keep good records of equipment use and maintenance, which is important to extend the life of the equipment and maintain warranty rights.

4. Pay attention to weather forecasts and take additional protective measures before extremely cold weather arrives.

Through the above measures, you can ensure that your air source heat pump remains in good condition during the winter idle period and is ready for use in the coming year. Remember, proper maintenance will not only extend the life of your equipment but also maintain its efficient performance, saving you money on energy bills.

Next article
  • What is handover testThe handover test is a series of testing and verification work performed after the power system, electrical equipment or industrial device is installed and before it is officially put into operation. It aims to ensure that the equipment performance meets the design requirements and the operation is safe and reliable. The following are the hot topics and structured data related to the handover tes
    2026-01-25 mechanical
  • What is switch stackingIn today's rapidly developing network environment, switch stacking technology has become an important means for enterprises to improve network performance and manageability. This article will introduce the concept, advantages, implementation methods and related technical details of switch stacking in detail, and combine it with the hot topics in the entire network in the past 10 days to help re
    2026-01-22 mechanical
  • Which brand of anti-mold glass glue is good? Reviews and purchasing guides for popular brands across the internetWith the arrival of humid weather in summer, anti-mold glass glue has become a hot topic in home decoration and repair. This article will combine the hot discussion data from the entire Internet in the past 10 days to analyze the brand selection, performance comparison and usage suggestions of anti-mold gl
    2026-01-20 mechanical
  • What does steel bar HC mean?In the fields of construction and engineering, steel bars are a commonly used building material, and "HC" as a classification or code for steel bars often causes questions among practitioners and learners. This article will combine the hot topics and hot content on the Internet in the past 10 days to analyze the meaning of "rebar HC" in detail, and attach relevant data comparisons to help
    2026-01-17 mechanical
Recommended articles
Reading rankings
Friendly links
Dividing line